新書推薦：
《
四海资身笔一枝：唐寅的书画人生【全球33家顶级机构珍藏，全景展现“江南第一风流才子”的艺术世界】
》
售價：HK$
857
《
50岁后的家庭生活：中老年人的日常活动、家务劳动与孩童照料
》
售價：HK$
653
《
《正义论》导读 壹卷Yebook 理解《正义论》关于哲学、科学、社会、历史和人类未来的批判性思考
》
售價：HK$
418
《
红楼梦脂评汇校本（平装版 全八册）
》
售價：HK$
1520
《
万物皆有时：中世纪的时间与生活
》
售價：HK$
449
《
英特纳雄耐尔——《国际歌》的诞生与中国革命
》
售價：HK$
857
《
爱丁堡古罗马史（上辑1-4卷）
》
售價：HK$
1422
《
心悦读丛书·善与恶的距离：日常生活中的伦理学
》
售價：HK$
347
|
| 內容簡介： |
|
本书在前4版的基础上，以MCS—51单片机为主体，从实际应用入手，结合大量实例循序渐进地讲述51单片机C语言编程方法，以及51单片机的硬件结构和功能应用。全书分为基础篇、应用篇和综合提高篇。所有实例均采用仿真软件Proteus仿真和实验板实验，使读者真正做到”边理论、边实践”，在实践中逐步掌握单片机的硬件结构和开发方法。本书在编写时力求通俗、易懂，硬件原理以”有用、够用”为原则，内容讲解以\紧密结合实践”为特色。因此，本书特别适合单片机零起点的初学者使用，可作为高等院校控制类专业学生、电子爱好者及各类工程技术人员的参考用书，也可作为高职、高专及中专院校的单片机课程教学用书。
|
| 關於作者： |
|
王会良，男，1974年生，河南偃师人，河南科技大学副教授，工学博士，硕士研究生导师。主要研究方向为：齿轮数字化设计与智能制造技术、智能控制技术、数控机床与可靠性技术。兼职为洛阳市设备维修协会、洛阳市设备管理学会会员。 近年来，参与完成的著作或教材有4部，电子工业出版社出版的《单片机C语言应用100例》第3版、《Protel DXP 2004应用100例》、清华大学出版社出版的《质量工程》、华中科技大学出版社出版的《工业机器人第三版》。
|
| 目錄：
|
基 础 篇
第 1 章 单片机概述及实验条件············································································2
1.1 单片机概述 ··························································································2
1.1.1 单片机的定义、分类与内部组成······················································2
1.1.2 单片机应用系统的结构及工作过程···················································5
1.1.3 单片机的应用 ··············································································6
1.2 单片机基础知识 ····················································································7
1.2.1 数制与数制间的转换·····································································7
1.2.2 单片机中数的表示方法及常用数制的对应关系····································9
1.2.3 逻辑数据的表示 ········································································.10
1.2.4 单片机中常用的基本术语····························································.11
1.3 单片机入门的有效方法与途径 ·······························································.12
1.4 学习单片机的基本条件 ········································································.12
1.4.1 软件条件 ·················································································.13
1.4.2 硬件条件 ·················································································.14
习题 ·······································································································.15
第 2 章 单片机开发软件及开发过程···································································.16
2.1 仿真软件 Proteus 的使用·······································································.16
2.1.1 Proteus 的主要功能特点 ······························································.16
2.1.2 实例 1：功能感受——利用 Proteus 对单片机播放《渴望》主题曲进行
仿真 ·······················································································.16
2.1.3 Proteus 软件的界面与操作介绍 ·····················································.17
2.1.4 实例 2：Proteus 仿真设计快速入门················································.20
2.2 Keil C51 的使用··················································································.30
2.2.1 单片机最小系统 ········································································.30
2.2.2 实例 3：用 Keil C51 编写点亮一个发光二极管的程序 ························.30
2.3 程序烧录器及烧录软件的使用 ·······························································.37
习题与实验 ······························································································.37
第 3 章 逐步认识单片机基本结构······································································.39
3.1 实例 4：用单片机控制一个灯闪烁··························································.39
3.1.1 实现方法···················································································39
3.1.2 程序设计···················································································39
3.1.3 用 Proteus 软件仿真 ·····································································40
3.1.4 延时程序分析·············································································42
3.2 实例 5：将 P1 口状态送入 P0、P2 和 P3 口 ···············································43
3.2.1 实现方法···················································································43
3.2.2 程序设计···················································································44
3.2.3 用 Proteus 软件仿真 ·····································································44
3.2.4 用实验板进行实验·······································································45
3.2.5 I/O 口功能介绍···········································································45
3.2.6 I/O 口的结构分析········································································45
3.3 实例 6：使用 P3 口流水点亮 8 位 LED ······················································48
3.3.1 实现方法···················································································48
3.3.2 程序设计···················································································49
3.3.3 用 Proteus 软件仿真 ·····································································50
3.3.4 用实验板进行实验·······································································50
3.4 实例 7：通过对 P3 口地址的操作流水点亮 8 位 LED ····································50
3.4.1 实现方法······································································
|
|
購物車/收銀台(0) | 在線留言板
| 付款方式
| 聯絡我們
| 運費計算
| 幫助中心 |
加入書簽
HOME
新書上架
